Amano EM-e II Скачать руководство пользователя страница 3 | Manualshive

Страница: 3 / 56

Amano EM-e II Скачать руководство пользователя страница 3

２

Foreword

This product is an electrical collection type mist collector using high
voltage to collect both oily mist and water-soluble mist from
metalworking

●

This machine is designed for the purpose in collecting oil mist generated from the metal machining
process of machining centers or NC tooling machines. However, the machine is not applicable to the
oil mist which includes a lot of dust (1

％

and more in weight ratio), strong alkaline mist, strong

acidic mist, or solvent mist, metal fume from meltdown.

●

This product cannot be used for the explosive and inflammable substance and the substance
described in the next page “

△

Danger”.

●

This operation manual describes about the standard specifications. Custom-order could differ the
contents such as external dimensions and performance.

●

The specifications , appearance of the dust collector and the description in this manual are subject to
change due to improvements.

●

For notes on the suctioning requirements, refer to Page 7.

●

The illustration inside the manual is drawn based on EM-15e

Ⅱ

. Other machine could differ the

contents.

A physical accident, failure, and/or property damage is not covered by our warranty if they occurred
by the use of it in the following manners.

・

Fire and explosion in the mist collector caused by ignitability or inflammability of sucked mist.

・

Improper operating conditions or usage different from that specified in this manual.

・

Failure to maintain the mist collector or replace the consumable parts as specified in this manual.

・

Any modification, repair, or equipment transfer performed by a third party or personnel not

authorized by AMANO.

・

Natural disasters or calamities, such as fires, earthquakes, or floods.

・

Any event that could not be predicted scientifically or technologically at the time of manufacture.

・

Use of a secondhand mist collector.

・

Other causes that are not the responsibility of AMANO.

Things to be acknowledged beforehand

Disclaimer

«
1
2
3
4
5
...
»

Содержание EM-e II

























































Отзывы:

Нет отзывов