Amano EM-e II, Руководство по эксплуатации, Страница: 11 / 56

１０
3
．
Preparation
Be sure to read and understand on the page 3 to 7 “For safety operation” carefully before use
Installation
Observe the following requirements when installing the collector. Failure to do so could prevent the collector
from delivering maximum performance, cause the product to break down, or result in an accident.
●
Requirements for installation site
Make sure that the following installation requirements are satisfied to ensure safe operation and that
the collector delivers maximum performance.
Requirements Items to be checked Notes Remarks (1) Remarks (2) Checked
☑
Ambient
temperature
0°C - 40°C
□
Temperature
and humidity
Ambient relative
humidity
10 - 90%Rh No condensation
□
Altitude Altitude at which the
collector is installed
The collector should be
installed at an altitude
below 2,000 m.
□
Install the collector on
a level surface that can
safely support the
weight of the machine.
Weight of EM-15eII:
72 kg
Weight of EM-30eII:
120 kg
□
Install the collector in a
location where it will
not be subject to
strong vibrations or
shocks.
□
Not subject to direct
sunlight or rainwater.
Be sure to provide an
area for maintenance.
Refer to the
illustration below.
□
Do not install the
collector in a
hazardous location.
hazardous locations
provided for in laws
and regulations
□
Inflammable
substances
Gasoline, paint
thinner, benzine,
kerosene, etc.
□
Explosive materials Nitroglycerine, etc.
□
Explosive aluminum,
magnesium dust, or
other metallic dust
□
Ignitable substances
Red or yellow
phosphorus
□
Locations the
collector should not
be installed in
Do not install the
collector in a location
where explosions or
fires may occur
(locations where
hazardous materials
evaporate or
disperse).
Combustible dust Coal powder, fine
plastic powder, sulfur
dust, starch, etc.
□
Roller cart Use the cart only when
moving the collector.
Take measures to
prevent the collector
from toppling over.
Lock the casters and
secure the cart when
operating the
collector.
□
Indoors
Ventilation Install the collector in a
location with good
ventilation.
The collector
generates ozone.
Ozone has unique
odor.
□
Refer to: Suctioning requirements (Page 7); Requirements for oil drainage (Page 11); Requirements for connecting
ductwork (Page 12)