Amano EM-e II Скачать руководство пользователя страница 29

Страница: 29 / 56

２８

5. Maintenance

Be sure to read and understand on the page 3 to 7 “For safety operation” carefully before use

Display of message window

Message window displays the time of maintenance timer and the contents of error.
By pressing

△

▽

switch, the contents of

①

⑦

is changed. If

△

▽

switch is not pressed, the

displayed contents of

②

⑤

is automatically changed per 10 seconds. Error is kept displaying during

error.

Display

Contents

Remarks

TOP

When the

electrical equipment

cover is opened, “door” is
displayed.

During display, the INSPECTION
lamp is lit at the same time.

Ｔ

(Hour)

The rest time until set time of
maintenance is displayed.

The rest time is updated per1
hour. By pressing the SET
switch, the total amount of
operation time is displayed.
If you set the timer to “0”,only
four hyphen are displayed.

Error

When the error occurs, the
content is displayed. Until the
error is resolved, the display is
kept displaying.

If there are some errors, the
display is changed per 10
seconds.

(kV)

The voltage of the charging
electrode is displayed in real time.
The voltage is updated continually
per 0.5 seconds.

The voltage is displayed to the
nearest whole number.

(kV)

The voltage of the collecting
electrode is displayed in real time.
The voltage is updated continually
per 0.5 seconds.

The voltage is displayed to the
first decimal place.

Type

The product model is displayed.

Mode

The setting content of data is
displayed.

For setting the mode, change
the display by

△

▽

switch.

Содержание EM-e II

























































Результаты поиска

Содержание EM-e II

Отзывы:

Amano EM-e II, Руководство по эксплуатации, Страница: 29 / 56

Результаты поиска

Содержание EM-e II

Отзывы: