Amada ML-3015AS, Руководство по эксплуатации, Страница: 60 / 204

60
ML-3030AS/3015AS
1 . Setting Welding Schedules
BEAM Sets the beam selection to ON/OFF.
With this button pressed, a window to select the delivery to output for beam is
displayed. (The window depends on the setting of the memory switch.)
At ON, the safety shutter of the selected delivery is opened, the beamsplitter op-
erates, and a beam can be output. When there is even one delivery set to ON,
the button is displayed in blinking light blue.
<Note> For ML-30□□AS-110, it has no safety shutter and no beamsplitter. Even
if the button is pressed, no window is displayed. When the CONTROL
keyswitch is turned ON after starting the Laser, the button is displayed in
blinking light blue.
GUIDE Sets the guide light output to ON/OFF.
When the button is pressed, a window to select ON/OFF is displayed.
At ON, guide light is output. At OFF, no guide light is output.
The selected result (ON or OFF) is displayed at the button.
How to Use the Screen Selecting Buttons
SCHED When this button is pressed, the SCHEDULE screen appears.
Select this button to set laser output conditions or call the set SCHEDULE.
MON
When this button is pressed, the MONITOR screen appears.
Select this button to check the measured value of laser light.
STATUS When this button is pressed, the STATUS screen appears.
Select this button to check the laser welder control method or check the operation
log and version.
CONFIG
When this button is pressed, the CONFIG screen appears.
Select this button to change various settings.