Amada ML-3015AS, Руководство по эксплуатации, Страница: 49 / 204

2 . Connecting the Optical Fiber
49
ML-3030AS/3015AS
Chapter 2 Connections and Preparations of Each Section
Introduction Part
Inst
allat
ion and Preparation Part
Operating Part
Maintenance Part
Appendixes
2
Connecting the Optical Fiber
(1) Remove the cap at the end of the connector section.
⇒
Keep the cap in combination with the cap of the optical fiber removed in Step 1 to
prevent a dust from entering the inside.
(2) Insert the optical fiber so that a red dot on the optical fiber is in line with the two
red dots on the connector section.
⇒ Take care not to fall the O-ring.
(3) Turn the connector section about 37° in the direction of the arrow 1 indicated on
it.
⇒
Turn the connector section by hand without using a tool.
(4) Pull out the connector section about 2 mm and turn it in the direction of the arrow
2.
Cap of the
optical fiber
Cap of the
connector
section
Cap