Amada ML-3015AS, Руководство по эксплуатации, Страница: 189 / 204

Timing Chart
189
ML-3030AS/3015AS
Repeated operation (50 pps or more) (EXTERNAL CONTROL)
The following diagram shows the lapse of time in the case where laser is output ac-
cording to the number of repeated outputs of 50 pps or more.
*1 1s max. LD output preparation time
*2 150ms or more Shutter operation time
*3 1ms min. Monitor error output time. Minimum error output time for 1000 pps.
Introduction Part
Operating Part
Maintenance Part
Appendixes
Installation
and
Preparation
Part
*2
*3
(*: Operation on the user side)
150ms
or more
1ms min . (1000pps)
LD ON Output
Schedule 1 to 128
Input *
Ready Output
Beam Select 1 to 2 Input *
(except ML-30□□AS-110)
Laser Start Input *
Laser Stop Input *
(Laser light)
END Output
Monitor Normal Output
Monitor Trouble Output
1s max . *1
The time set on the CONFIG screen or more