Amada 1000ADP, Руководство по эксплуатации

Страница: 83 / 112

125ADP/300ADP/1000ADP DUAL PULSE RESISTANCE WELDING POWER SUPPLY
990-922 D-1
#6 – No Connection
#7 – No Connection
#8 – No Connection
#9 – No Connection
APPENDIX D
Communications
Section I. Introduction
Overview
The Power Supply has the ability to communicate with a host computer or with automation control
system. The communications option uses RS-232 to connect one control to one host.
Remote Programming
The codes needed to perform remote programming are listed in Section II, Communications Protocol
and Commands . Using these codes, users can write customized software for controlling all functions of
the welding control and interfacing the unit to automation control systems.
RS-232 Serial Connector Information
RS-232 settings
Baud Rate 9600, 19.2k, and 38.4k Baud
Data bits 8
Stop bit 1
Parity None
NOTES:

The host must be set to the same baud rate as the unit.

For a microprocessor-based conversion (such as the Edgeport USB converter from Inside
Outside Networks), the host computer should be running the Windows operating system.
#1 --.No Connection
#2 --. RS-232 Transmit
#3 – RS-232 Receive
#4 – No Connection
#5 – Signal Ground