Amada 1000ADP, Руководство по эксплуатации

Страница: 55 / 112

CHAPTER 4: OPERATING INSTRUCTIONS
125ADP/300ADP/1000ADP DUAL PULSE RESISTANCE WELDING POWER SUPPLY
990-922 4-7
Fast Welding
This feature is set in the
MENU
and determines whether data is saved automatically to non-volatile
memory.
When Fast Welding is ON, data is not saved automatically to non-volatile memory. The user must push
the
Save
button to save the data to non-volatile memory. If the unit is turned off before the
Save
button
is pressed, the data will be lost.
When Fast Welding is OFF, the data will be saved automatically in either of two timings. If there is no
weld fire signals for 12 seconds, the unit will save the data to non-volatile memory. If weld fire signals
occur at intervals less than 12 seconds, the unit will stop accepting fire signals and save the data to non-
volatile memory after 200 welds have been accumulated. The unit will take approximately 30
milliseconds to save the data and will ignore fire signals during this time. When the Power Supply is
turned OFF, any data that has not yet been saved to non-volatile memory will be lost.
The volatile and non-volatile memory locations each 9800 welds of data. Once the locations have 9800
welds, the oldest weld will be dropped when the next weld is performed. When the unit is turned off all
data in the volatile memory is lost. When the unit is turned on, all data in the non-volatile memory is
copied to the volatile memory. That data will then be available to the user.
Turning the Unit OFF
Weld counters and weld data are saved periodically to the non-volatile memory in the unit. In order to
maximize welding speed, this data is not saved to non-volatile memory after every single weld. In order
to assure that all data is saved to non-volatile memory before turning the unit OFF, press the
SAVE
button.