Full Height Tandem Installation Instructions
Installation Instructions [email protected] +1(909) 591-8431 www.alvaradomfg.com
Page 5
This product is shipped with all required installation hardware and components. Make sure that none of these parts
are missing and/or damaged before beginning installation. If there are parts missing and/or damaged, please stop the
installation and contact Alvarado.
Yoke
(Qty 2)
MST Illustrated Parts List
Parts List
Roto
(Qty 2)
OV
(Qty 1)
Yoke Guard Plate
(Qty 2)
Bottom Bearing
Plate (Qty 2)
Bottom Bearing
Cover (Qty 4)
Bottom Bearing
(Qty 2)
Top Channel
(Qty 1)
10-32 x ½" Allen Head
Screw (Qty 12)
½" x 1½" Hex Head
Bolt (Qty 2)
#10 x ¾" Phillips Pan Head
Screw (Qty 20)
⅜" x 2½" Anchor Bolt
(Qty 24)
⅜" Flat Washers
(Qty 24)
⅜" x 2.00" Concrete Anchors
(Qty 24)
Top Bearing
Cover (Qty 2)
⅜" x 4½" Anchor Bolt
(Qty 6) - Yoke Only
NOTE
Alvarado full height turnstiles share common components across models. The parts list below is
for the MSTT and MSTT-X models only. Reference appendix A-B to see alternate components
used on other models.
Concrete Anchor Package
NOTE
For stainless steel installations, discard the 2½" zinc anchor bolts and ⅜" zinc flat washers packaged
with the concrete anchors. Use the supplied 2½" stainless steel anchor bolts and ⅜" stainless steel
flat washers.
½" x 1" Hex Head
Bolt (Qty 2)
½" x 2¾" Hex
Bolt Head (Qty 4)
½" Nut
(Qty 8)
½" Flat
Washer (Qty 2)
½" Lock
Washer (Qty 5)
