Full Height Tandem Installation Instructions
Installation Instructions [email protected] +1(909) 591-8431 www.alvaradomfg.com
Page 33
Fig. 33
Upper
Shaft
Bearing
Slide Rods
Lubrication (Cont)
Fig. 35
Fig. 34
Lower
Shaft
Bearing
Main Cam and Lower Shaft Bearing (Figure 34)
Lubricate the grease fitting on the lower shaft bearing
using the recommended grease and a grease gun.
Main Cam and Upper Shaft Bearing (Figure 33)
Lubricate the grease fitting on the upper shaft bearing
using the recommended grease and a grease gun.
Solenoid
Spring
Lock Arm
Return
Spring
Fig. 32
Self-Centering Mechanism (Figure 35)
Clean and lubricate the two slide rods using DuPont
Teflon Non-Stick Dry-Film Lubricant. Place 2 to 3 drops
of DuPont Teflon Non-Stick Dry-Film Lubricant along the
shaft of the slide rods. Rotate the turnstile 4 to 5 times to
ensure the lubricant is spread evenly along the slide rods.
Springs (Figure 32)
Lubricate spring contact points with DuPont Teflon Non-
Stick Dry-Film Lubricant. Place lubricant on spring body
by adding 1 drop on contact points.
