6 • MN-35949 • Rev 04 • 06/16 • Combitherm® CT PROformance™ Series • Technical Service Manual
Safety Procedures
CAUTION
Used to indicate the presence of a hazard that can or
will cause minor personal injury, property damage, or a
potential unsafe practice if the warning included with this
symbol is ignored.
CAUTION
Used to indicate the presence of a
hazard that can or will cause minor or
moderate personal injury or property
damage if the warning included with this
symbol is ignored.
DANGER
Used to indicate the presence of a
hazard that will cause severe personal
injury, death, or substantial property
damage if the warning included with this
symbol is ignored.
WARNING
Used to indicate the presence of a
hazard that can cause personal injury,
possible death, or major property
damage if the warning included with this
symbol is ignored.
• This appliance is intended to cook, hold or process foods
for the purpose of human consumption. No other use for
this appliance is authorized and is therefore considered
dangerous. The appliance must not be used to cook
food containing fl ammable materials (such as food with
alcohol). Substances with a low fl ash point can ignite
spontaneously and cause a fi re.
• This appliance is intended for use in commercial
establishments where all operators are familiar with
the purpose, limitations, and associated hazards of this
appliance. Operating instructions and warnings must
be read and understood by all operators and users. We
recommend regular training of your staff to avoid the
risk of accident or damage to the appliance. Operators
must also receive regular safety instructions.
• Any troubleshooting guides, component views, and
parts lists included in this manual are for general
reference only and are intended for use by qualifi ed and
trained technicians.
• This manual should be considered a permanent part of
this appliance. This manual and all supplied instructions,
diagrams, schematics, parts lists, notices, and labels
must remain with the appliance if the item is sold or
moved to another location.
NOTICE:
Used to notify personnel of installation,
operation, or maintenance information that is
important but not hazard related.
Knowledge of proper procedures is essential to the
safe operation of electrically and/or gas energized
equipment. The following hazard signal words and
symbols may be used throughout this manual.
Used to indicate that referral to operating
instructions is a mandatory action. If
not followed the operator could suff er
personal injury.
Used to indicate that referral to operating
instructions is recommended to understand
operation of equipment.
NOTICE:
For equipment delivered for use in any
location regulated by the following
directive: 2012/95/EC WEEE
Do not dispose of electrical or electronic
equipment with other municipal waste.
Содержание COMBITHERM CT PROFORMANCE 10-10E
Страница 181: ......
