Altigen AltiWare ACM 5.1, Руководство администратора

Страница: 358 / 454

Chapter 25: Enterprise VoIP Network Management
344 AltiWare ACM 5.1 Administration Manual
After you add a member server to the Domain, an entry is also added to the IP dialing
table and propagated to all members automatically.
In the Global Server Location panel, the status will show "Active" if the Domain master
communicates to the member successfully.
In the event that you need to shut down the Domain Master for a period of time, you
can change the Master role to another member system by selecting one of the member
systems and clicking the Set as Master button.
Rejoining a Server to the VoIP Domain
If a slave server crashes, or for some other reason disconnects and never returns by
itself into the domain, you will have to manually rejoin it to the VoIP domain:
1. Rebuild the slave, if necessary.
2. In the VoIP > Multi-Site Domain Configuration window, make sure the slave’s
Server Role is Stand-alone and that the domain name is correct.
3. The System ID of this slave should be the same as it was before it became
disconnected from the domain. (This ID is set in AltiWare Admin > System
Configuration > General tab.)
4. In AltiEnterprise Manager, Global Server Location panel, select the slave and click
the Rejoin button to synchronize the slave with the domain.
Member Key Enter this server’s member key. (Configured in this server’s
AltiEnterprise Location Manager: VoIP > MultiSite
Domain Configuration).
Parameter Definition