manualshive.com logo in svg

Altigen AltiWare ACM 5.1, Руководство администратора

Administration Manual для Altigen AltiWare ACM 5.1 доступен для бесплатного скачивания на manualshive.com. Получите подробное руководство по управлению продуктом, включая инструкции по настройке и обслуживанию. Скачайте его прямо сейчас, чтобы максимально эффективно использовать ваше оборудование.

Поделиться
Скачать
background image

Chapter 1:  Overview

AltiWare ACM 5.1 Administration Manual 17

Monitor List - lets you configure an extension’s privilege to see other extension’s call 
activity through AltiView or AltiAgent.
Password Security - allows administrators to lock extensions that have been 
“attacked” with false password attempts and to set default system passwords for newly 
created or newly assigned extensions.
Out Call Routing Configuration - allows outgoing calls to be directed to particular 
trunk routes, based on parameters assigned in the Out Call Routing table.
Remote Administration - a version of the AltiWare Administrator application that can 
be installed on a Windows 2000/2003/XP client computer to remotely administer one or 
more systems.
Transmit Extension Calling ID - each extension can be configured with a calling ID. 
When an outgoing call is made by this extension through PRI or IP trunks, the calling ID 
is displayed as the Caller ID to the receiving caller.

Voice over IP Features

VoIP features include:
Bandwidth Control for VoIP Sessions - Each server can configure the maximum 
concurrent VoIP sessions based on its Internet or intranet bandwidth. This feature is to 
ensure that voice quality will not be impacted if too many VoIP sessions are connected 
at the same time.
Codec Profile - Multiple codec profiles with different settings can be created and applied 
to different locations. Each profile can have a different codec, jitter buffer, and packet 
length to accommodate different IP connections.
DNIS Name Display and Routing over IP Tie Trunk - allows for DNIS information to 
be transferred to the other system when routed over IP tie-trunks. DNIS name of 
matched entry can be displayed at AltiConsole, AltiView, AltiAgent, and handset.
Caller ID/Name Sent Over IP Tie Trunk - SIP supports sending the caller’s name, so 
SIP and H.323 calls may display different caller ID information.
DTMF payload embedded with RTP (RFC 2833) - this feature helps to resolve DTMF 
tone detection and regeneration when using G.723.1 or G.729 codecs. Low bit rate 
compression can distort DTMF tones during compression and cause the far end device to 
not be able to recognize the DTMF digits. RFC 2833 specifies a separate RTP payload 
format to carry DTMF information to ensure the other side can recognize the tone 
properly.
Dynamic Jitter Buffer - due to various delays in the IP network, audio packet streams 
may be delivered late or out of order. The system is able to buffer incoming packets and 
re-sequence them by maintaining a queue. This queue is adjusted dynamically to 
accommodate different network environment characteristics.
Echo Cancellation - due to bandwidth limitations and device loading, long delays may 
occur during packet delivery process, which worsens the echo effect voice speech. Echo 
cancellation is provided to maintain reasonable voice quality.
G.711 Codec - toll quality (64K) digital voice encoding, which guarantees 
interoperability and better voice quality.
G.723.1 Codec - a dual rate audio encoding standard, which provides near toll quality 
performance under clean channel conditions.
G.729 A+B Codec - speech data encoding/decoding standard of 8 Kbps.

Содержание AltiWare ACM 5.1







































































































































































































































































































































































































































































Отзывы:

Нет отзывов

Похожие инструкции для AltiWare ACM 5.1

EAW Resolution Introduction Manual preview
Resolution
Бренд: EAW Страницы: 36
Palm SmartOffice SmartOffice Mobile User Manual preview
SmartOffice SmartOffice Mobile
Бренд: Palm Страницы: 29
MACROMEDIA BREEZE-MANAGING EXTERNAL BREEZE REPORTS Manual preview
BREEZE-MANAGING EXTERNAL BREEZE REPORTS
Бренд: MACROMEDIA Страницы: 18
Brocade Communications Systems 8/24 Administrator'S Manual preview
8/24
Бренд: Brocade Communications Systems Страницы: 64
SMART SMART Notebook SE Installation Manual preview
SMART Notebook SE
Бренд: SMART Страницы: 20
McAfee NAPCKE-AB-AA - VirusScan For NetApp Configuration Manual preview
NAPCKE-AB-AA - VirusScan For NetApp
Бренд: McAfee Страницы: 54
ACRONIS BACKUP AND RECOVERY 10 SERVER FOR LINUX - Installation Manual preview
BACKUP AND RECOVERY 10 SERVER FOR LINUX -
Бренд: ACRONIS Страницы: 14
ACRONIS Backup & Recovery 10 Advanced Editions Quick Start Manual preview
Backup & Recovery 10 Advanced Editions
Бренд: ACRONIS Страницы: 10
Ulead BURN.NOW 4 User Manual preview
BURN.NOW 4
Бренд: Ulead Страницы: 58
Ulead BURN.NOW 4.5 User Manual preview
BURN.NOW 4.5
Бренд: Ulead Страницы: 60
R&S SMW-K555 User Manual preview
SMW-K555
Бренд: R&S Страницы: 45
Juniper VXA2000 Series Quick Start Manual preview
VXA2000 Series
Бренд: Juniper Страницы: 14
Oce XMPie User Manual preview
XMPie
Бренд: Oce Страницы: 22
National Instruments Measurement Studio User Manual preview
Measurement Studio
Бренд: National Instruments Страницы: 66
UMAX Technologies PowerColor User Manual preview
PowerColor
Бренд: UMAX Technologies Страницы: 127
Garmin Que Application Manual preview
Que
Бренд: Garmin Страницы: 33
Canon CAPTUREPERFECT 3.1 Operation Manual preview
CAPTUREPERFECT 3.1
Бренд: Canon Страницы: 85
SanDisk MUSIC MATCH JUKEBOX 9.0 User Manual preview
MUSIC MATCH JUKEBOX 9.0
Бренд: SanDisk Страницы: 11

Бренды по названию

Популярные бренды

Загрузить еще бренды