IP-48ADM16 HARDWARE REFERENCE MANUAL
ALPHI TECHNOLOGY CORP.
Page 1
REV 1.0
Part Number: 833-13-000-4000
Copyright
©
2007, ALPHI Technology Corporation
1. GENERAL
DESCRIPTION
1.1 INTRODUCTION
The
*
is a 16 bit single width IP module designed for high speed burst A/D data
acquisition in 16 bits. The primary features of the
*
are:
•
Mix of up to 48 single-ended or 24 differential channels
•
On-board voltage reference
•
Fault and Over-voltage Protected (-40 V, + 55 V) multiplexer
•
1 MSPS 16-bit A/D converter
•
Software programmable single-ended (SE) or differential (DIFF) input and gain
for each channel
•
Input Ranges:- ±10V, ±5V,+/-2.5V,+/-1.25V using a software programmable gain
amplifier
•
Additional jumper selectable gain from A/D converter(1-2-4-8)
•
Acquisition time <= 3
μ
S without gain and channel change
•
Internal sequencer with channel list for acquisition of selected channels
•
64k x 16 Dataram dual ported storage
•
Channel list in RAM.
•
DMA
capable
•
Programmable
Interrupt
•
Flash EEPROM for gain/offset correction data
•
On board input switches for offset or gain calibration
•
Dual threshold level detection for each channel with interrupt possibilities
•
Analog trigger with any channel and level selection
