IP-48ADM16 HARDWARE REFERENCE MANUAL
ALPHI TECHNOLOGY CORP.
Page 16
REV 1.0
Part Number: 833-13-000-4000
Copyright
©
2007, ALPHI Technology Corporation
In/out=1
In/out =0
SCAT_SCAN = 1
SCAT_SCAN = 0
AEB
Scan Block
When this bit is set to “0”, the state machine will scan and execute the channel list
once only and then stop, waiting for the next trigger. This is the state after a reset.
If set to “1”, upon an acquisition command the state machine will run as long as the
DataRAM pointer is reach or the scan pointer is reach.
Count Type
When set to “0” the DataRAM pointer witch contains an address is compared to the
STATE Machine address.
When set to “1” the DataRAM pointer witch contains a number of scan desired is
compare with a scan counter.
3.3.10 Start Acquisition
Address: I 0x12
A write to this write-only register will start acquisition immediately.
3.3.11 Interrupt Vector Register
Address: I 0x14
This 8-bit Interrupt Vector register can be programmed by the host. It will be output to
during an interrupt acknowledge IP INTESELA access.
