![Alphi IP-48ADM16 Скачать руководство пользователя страница 23](http://html1.mh-extra.com/html/alphi/ip-48adm16/ip-48adm16_reference-manual_2906578023.webp)
IP-48ADM16 HARDWARE REFERENCE MANUAL
ALPHI TECHNOLOGY CORP.
Page 19
REV 1.0
Part Number: 833-13-000-4000
Copyright
©
2007, ALPHI Technology Corporation
4. CONNECTORS
The connector placement is depicted below. There are no configuration jumpers.
Figure 4.1: Connector Locations
5. JUMPER
DESCRIPTIONS
JUMPER
FACTORY SETTING
DESCRIPTION
P1
Programming Header Header for programming Cyclone
EP1C12Q240.
P2
Factory Use
Header used for debugging purpose.
W1
A/D Input settings (
see page 3 for
settings)
The software programmable PGA allows
selecting an input range of +/-10v, +/-5v, +/-
2.5v, or +/-1.25v, based on a gain of 1, 2, 4,
or 8, when the A/D is selected with a +/-10V
range by jumper.
J1
1-2
1-2 sets IN-48 on I/O P2 pin 49 and 2-3
setup Ex-Event on pin 49
J2 2-3
Factory
Use
J3 1-2
Factory
Use
J4
1-2 3-4
MSEL0 and MSEL1 for programming
Cyclone EP1C12Q240.
Table 5.1 Jumper Descriptions