Allworx PowerFlex P810, Руководство пользователя

Страница: 81 / 236

PowerFlex
8/24/48 Port GbE PoE Managed Switch User’s Guide
4.7.3
Port Group Filtering
This section describes how to set the Port Group Filtering in the MLD Snooping function.
To configure the MLD Snooping Port Group Filtering via the web interface:
1. Navigate to Configuration > MLD Snooping > Port Group Filtering .
2. Click Add new Filtering Group.
3. Specify the Filtering Groups for each port.
4. Click
Apply or click Reset to cancel changes and revert to previously saved values. 0.
Figure 52:
MLD Snooping Port Group Filtering
Parameter Description
Delete Check to delete the entry. It will be deleted during the next apply.
Port The logical port for the settings.
Filtering Groups The IP Multicast Group that will be filtered.
Toll Free 1-866- ALLWORX • 585 -421- 3850 • www.allworx.com
Revised: October 30, 2013
Page 73