Allworx PowerFlex P810, Руководство пользователя

Страница: 34 / 236

PowerFlex
8/24/48 Port GbE PoE Managed Switch User’s Guide
3.9
Access
The function is used to configure SNMPv3 access. Max Group Number : 14
To configure the SNMP Access via the web interface:
1. Navigate to System > SNMP > Access .
2. Click Add new access , and specify the SNMP Access parameters.
3. Click Apply . 0.
Figure 19: SNMP Accesses Configuration
Parameter Description
Delete Check to delete the entry. It will be deleted during the next save.
Group Name A string identifying the group name. The string length is 1 to 32, and the content is
ASCII characters from 33 to 126.
Security Model Indicates the security model that this entry should belong to. Possible security
models are:
any: Any security model accepted(v1|v2c|usm).
v1: Reserved for SNMPv1.
v2c: Reserved for SNMPv2c.
usm: User-based Security Model (USM)
Security Level Indicates the security model that this entry should belong to. Possible security
models are:
NoAuth, NoPriv: No authentication and no privacy.
Auth, NoPriv: Authentication and no privacy.
Auth, Priv:
Authentication and privacy.
Read View Name The name of the MIB view defining the MIB objects for which the current values
Are requested. The string length is 1 to 32, and the content is ASCII characters
from 33 to 126. Write View Name.
Write View name The name of the MIB view defining the MIB objects for which this request may
potentially set new values. The string length is 1 to 32, and the content is ASCII
characters from 33 to 126.
Toll Free 1-866- ALLWORX • 585 -421- 3850 • www.allworx.com
Revised: October 30, 2013
Page 26