Allworx PowerFlex P810, Руководство пользователя

Страница: 151 / 236

PowerFlex
8/24/48 Port GbE PoE Managed Switch User’s Guide
Tag Value of Tag field can be 'Any', 'Untag' or 'Tag'
VID Valid value of VLAN ID can be any value in the range 1-
4095 or 'Any'; user can
enter either a specific value or a range of VIDs
PCP Priority Code Point: Valid value PCP are specific(0, 1, 2, 3, 4, 5, 6, 7) or range(0 -
1, 2-3, 4- 5, 6 -7, 0-3, 4-7) or 'Any'
DEI Drop Eligible Indicator: Valid value of DEI can be any of values between 0, 1 or
'Any'
SMAC Source MAC address: 24 MS bits (OUI) or 'Any'
DMAC Type Destination MAC type: possible values are unicast(UC), multicast(MC),
broadcast(BC) or 'Any'
Frame Type Frame Type can have any of the following values
• Any
• Ethernet
• LLC
• SNAP
• IPv4
• IPv6
NOTE: All frame types are explained below:
• Any: Allow all types of frames.
• Ethernet: Ethernet Type Valid Ethernet type can have value within 0x600-0xFFFF or
‘Any’; default value is 'Any'.
• LLC: SSAP Address: Valid SSAP(Source Service Access Point) can vary from 0x00
to 0xFF or 'Any', the default value is 'Any'
DSAP Address: Valid DSAP(Destination Service Access Point) can vary from 0x00
to 0xFF or 'Any', the default value is 'Any'
Control Address: Valid Control Address can vary from 0x00 to 0xFF or 'Any', the
default value is 'Any'
• SNAP : PID: Valid PID(a.k.a. Ethernet type) can have value within 0x00-0xFFFF or
'Any', default value is 'Any'
• IPv4: Protocol IP protocol number: (0- 255, TCP or UDP) or 'Any' Source IP Specific
Source IP address in value/mask format or 'Any'. IP and Mask are in the format
x.y.z.w where x, y, z, and w are decimal numbers between 0 and 255. When
converting Mask to a 32-bit binary string and read from left to right, all bits following
the first zero must also be zero.
DSCP Diffserv Code Point value(DSCP): It can be specific value, range of value or
'Any'. DSCP values are in the range 0-63 including BE, CS1-CS7, EF or AF11-AF43
IP Fragment IPv4 frame fragmented option: yes|no|any
Sport Source TCP/UDP port:(0-
65535) or 'Any', specific or port range applicable for IP
protocol UDP/TCP
Dport Destination TCP/UDP port:(0-
65535) or 'Any', specific or port range applicable
for IP protocol UDP/TCP
• IPv6 :Protocol IP protocol number: (0- 255, TCP or UDP) or 'Any'
Toll Free 1-866- ALLWORX • 585 -421- 3850 • www.allworx.com
Revised: October 30, 2013
Page 143