Allworx PowerFlex P810, Руководство пользователя

Страница: 198 / 236

PowerFlex
8/24/48 Port GbE PoE Managed Switch User’s Guide
the server on the authentication port and dropped.
Rx Packets Dropped The number of RADIUS packets that were received from the server on the
authentication port and dropped for some other reason.
Tx Access Requests The number of RADIUS Access-Request packets sent to the server. This does
not include retransmissions.
Tx Access Retransmissions The number of RADIUS Access-Request packets retransmitted to the RADIUS
authentication server.
Tx Pending Requests The number of RADIUS Access-Request packets destined for the server that
have not yet timed out or received a response. This variable is incremented
when an Access-Request is sent and decremented due to receipt of an
Access-Accept, Access-Reject, Access-Challenge, timeout, or retransmission.
Tx Timeouts The number of authentication timeouts to the server. After a timeout, the client
may retry to the same server, send to a different server, or give up. A retry to
the same server is counted as a retransmit as well as a timeout. A send to a
different server is counted as a Request as well as a timeout.
Other Info
State State Shows the state of the server. It takes one of the following values:
Disabled: The selected server is disabled.
Not Ready: The server is enabled, but IP communication is not yet up and
running.
Ready: The server is enabled, IP communication is up and running, and the
RADIUS module is ready to accept access attempts.
Dead (X seconds left): Access attempts were made to this server, but it did not
reply within the configured timeout. The server has temporarily been disabled,
but will get re-enabled when the dead-time expires. The number of seconds left
before this occurs is displayed in parentheses. This state is only reachable
when more than one server is enabled.
Round-trip Time The time interval (measured in milliseconds) between the most recent Access-
Reply/Access-Challenge and the Access-Request that matched it from the
RADIUS authentication server. The granularity of this measurement is 100 ms.
A value of 0 ms indicates that there hasn't been round-trip communication with
the server yet.
RADIUS Accounting Servers
Rx Responses The number of RADIUS packets (valid or invalid) received from the server.
Rx Malformed Responses The number of malformed RADIUS packets received from the server.
Malformed packets include packets with an invalid length. Bad authenticators
or unknown types are not included as malformed access responses.
Rx Bad Authenticators The number of RADIUS packets containing invalid authenticators received
from the server.
Rx Unknown Types The number of RADIUS packets of unknown types that were received from the
Toll Free 1-866- ALLWORX • 585 -421- 3850 • www.allworx.com
Revised: October 30, 2013
Page 190