Allworx PowerFlex P810, Руководство пользователя

Страница: 119 / 236

PowerFlex
8/24/48 Port GbE PoE Managed Switch User’s Guide
4.11.4
Port Status
This page displays the VLAN status by port.
To display VLAN Port Status in the web interface:
1. Navigate to Configuration > VLAN > Port Status .
2. Select an option from the drop-down list. 0.
Figure 76: VLAN Port Status for Static User
Parameter Description
Port The logical port for the settings contained in the same row.
PVID Displays the VLAN identifier for that port. The values are 1 through 4095. The default
value is 1.
Port Type Displays the Port Type. Port type can be any of Unaware, C-port, S-port, Custom S-
port.
If Port Type is Unaware, all frames are classified to the Port VLAN ID and tags are not
removed. C-port is Customer Port. S-port is Service port. Custom S-port is S-port with
Custom TPID.
Ingress Filtering Displays the ingress filtering on a port. This parameter affects VLAN ingress
processing. If ingress filtering is enabled and the ingress port is not a member of the
classified VLAN, the frame is discarded.
Frame Type Displays whether the port accepts all frames or only tagged frames. This parameter
affects VLAN ingress processing. If the port only accepts tagged frames, untagged
frames received on that port are discarded.
Tx Tag Displays egress filtering frame status whether tagged or untagged.
UVID Displays UVID (untagged VLAN ID). Port's UVID determines the packet's behavior at
the egress side.
Conflicts Displays conflicts that exist or not. When a Volatile VLAN User requests to set VLAN
membership or VLAN port configuration, the following conflicts can occur:
• Functional Conflicts between features.
• Conflicts due to hardware limitation.
• Direct conflict between user modules.
Toll Free 1-866- ALLWORX • 585 -421- 3850 • www.allworx.com
Revised: October 30, 2013
Page 111