Allworx PowerFlex P810, Руководство пользователя

Страница: 5 / 236

PowerFlex
8/24/48 Port GbE PoE Managed Switch User’s Guide
Compliances and Safety Statements
FCC – Class A
This equipment has been tested and found to comply with the limits for a Class A computing device
pursuant to Subpart J of part 15 of FCC Rules, which are designed to provide reasonable protection
against such interference when operated in a commercial environment.
This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used
in accordance with the instruction manual, may cause harmful interference to radio communications.
Operation of this equipment in a residential area is likely to cause harmful interference in which case
the user must correct the interference at their own expense.
CAUTION: changes or modifications not expressly approved by the party
responsible for compliance could void the authority to operate the
equipment.
It is possible to use unshielded twisted-pair (UTP) for RJ- 45 connections - Category 3 or better for 10
Mbps connections, Category 5 or better for 100 Mbps connections, Category 5, 5e, or 6 fo r 1000 Mbps
connections. For fiber optic connections, it is possible use a 50/125 or 62.5/125 micron multimode fiber
or 9/125 micron single -mode fiber.
CE Mark Declaration of Conformance for EMI and Safety (EEC)
This equipment has been tested and found to comply with the protection requirements of European
Emission Standard EN55022/EN61000 - 3 and the Generic European Immunity Standard EN55024.
Caution:
Maintenance Personnel:
To avoid electric shock, turn the power off and detach the input power cord prior
to doing any equipment maintenance.
.
After completing the equipment maintenance, verify the ground connection and setup.
Toll Free 1-866- ALLWORX • 585 -421- 3850 • www.allworx.com
Revised: October 30, 2013
Page iii