Allworx PowerFlex P810, Руководство пользователя

Страница: 111 / 236

PowerFlex
8/24/48 Port GbE PoE Managed Switch User’s Guide
4.10.6
Filtering Database
Filtering Data Base Configuration gathers many functions, including MAC Table Information, Static
MAC Learning, etc.
MAC table
Switching of frames is based upon the DMAC address contained in the frame. The switch builds up a
table that maps MAC addresses to switch ports for determining which ports the frames should go to
(based upon the DMAC address in the frame). This table contains both static and dynamic entries. The
network administrator configures the static entries, if the administrator wants to do a fixed mapping
between the DMAC address and switch ports.
The frames also contain a MAC address (SMAC address), which displays the MAC address of the
equipment sending the frame, and uses the SMAC address by the switch to automatically update the
MAC table with these dynamic MAC addresses. The MAC table removes dynamic entries after not
seeing the frame with the corresponding SMAC address after a configurable age time.
4.10.7
Configuration
Configure the MAC Address Table on this page. Set timeouts for entries in the dynamic MAC Table and
configure the static MAC table here.
To configure MAC Address Table via the web interface:
1. Navigate to Configuration > Filtering Database > Configuration .
2. Check the Disable Automatic Aging checkbox to disable the feature.
3. Specify the Aging Time.
4. Click
Apply . 0.
MAC Table Learning
1. Use the radio buttons to set the port members to Auto, Disable, or Secure.
2. Click
Apply . 0.
Static MAC Table Configuration
1. Click Add new Static entry .
2. Specify the VLAN ID, MAC address and select the port members.
3. Click
Apply or click Reset to cancel changes and revert to previously saved values. 0.
Toll Free 1-866- ALLWORX • 585 -421- 3850 • www.allworx.com
Revised: October 30, 2013
Page 103