Allied Telesis AT-AR220E Скачать руководство пользователя страница 87 | Manualshive

Страница: 87 / 92

background image

AT-AR220E Broadband Router Installation Guide

87

Standards: This product meets the following safety standards.

1

LIGHTNING DANGER
DANGER: DO NOT WORK on equipment or CABLES during periods of LIGHTNING
ACTIVITY.

2

CAUTION: POWER CORD IS USED AS A DISCONNECTION DEVICE. TO DE-ENERGIZE
EQUIPMENT, disconnect the power cord.

3

ELECTRICAL - TYPE CLASS 1 EQUIPMENT
THIS EQUIPMENT MUST BE EARTHED. Power plug must be connected to a properly
wired earth ground socket outlet. An improperly wired socket outlet could place
hazardous voltages on accessible metal parts.

4

PLUGGABLE EQUIPMENT, the socket outlet shall be installed near the equipment and
shall be easily accessible.

5

CAUTION: Air vents must not be blocked and must have free access to the room
ambient air for cooling.

6

OPERATING TEMPERATURE: This product is designed for a maximum ambient
temperature of 40° degrees C.

7

ALL COUNTRIES: Install product in accordance with local and National Electrical
Codes.

U.S. Federal Communications Commission

This device complies with Part 15 of the FCC Rules. Operation is subject to the
following two conditions:

This device may not cause harmful interference.

This device must accept any interference received, including interference that
may cause undesired operation.

Note: This equipment has been tested and found to comply with the limits for a
Class B digital device, pursuant to part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses, and can radiate radio
frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular installation. If
this equipment does cause harmful interference to radio or television reception,
which can be determined by turning the equipment off and on, the user is
encouraged to try to correct the interference by one or more of the following
measures:

- Reorient or relocate the receiving antenna.

- Increase the separation between the equipment and receiver.

- Connect the equipment into an outlet on a circuit different from that to which
the receiver is connected.

- Consult the dealer or an experienced radio/TV technician for help.

Canadian Department of Communications

This Class B digital apparatus meets all requirements of the Canadian
Interference-Causing Equipment Regulations.

Cet appareil numérique de la classe B respecte toutes les exigences du Règlement
sur le matériel brouilleur du Canada.

«
...
85
86
87
88
89
...
»

Содержание AT-AR220E





























































































Отзывы:

Нет отзывов

Похожие инструкции для AT-AR220E

PowerLine DHP-W611AV

Бренд: D-Link Страницы: 78

SISPM1040-582-LRT

Бренд: Lantronix Страницы: 2

Бренд: Lantronix Страницы: 7

Maestro E220 Series

Бренд: Lantronix Страницы: 25

Patton SmartNode 2300 Series

Бренд: Patton electronics Страницы: 2

Бренд: Paradyne Страницы: 12

Бренд: process-informatik Страницы: 8

SUPERLOADER DLT MAGAZINE

Бренд: Tandberg Data Страницы: 6

Бренд: RAIDAGE Страницы: 60

Бренд: X-Micro Страницы: 49

Бренд: Airlink101 Страницы: 13

EdgeRouter ER-8

Бренд: Ubiquiti Страницы: 20

Бренд: 2N Telekomunikace Страницы: 67

Бренд: NETGEAR Страницы: 152

Fast EtherLink XL PCI 10/100BASE-TXNetwork Interface...

Бренд: 3Com Страницы: 12

Бренд: Lanner Страницы: 141

PD-9501-10GCO/AC

Бренд: Microchip Technology Страницы: 41

Бренд: LevelOne Страницы: 4

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды