AT-AR220E Broadband Router Installation Guide
57
3.
After entering your configurations, click Apply.
The new entry is added to the Excluded IP table.
BootP IP Table
You can use the BootP IP Table to reserve IP addresses for network
devices that will be obtaining their IP addresses from the BootP service.
The IP addresses must be within the address pool of the DHCP server.
To add a new entry to the BootP IP Table:
1.
Click the BootP IP Table selection to display the table in Figure 31.
Figure 31 BootP IP Table
2.
To add a new entry to the table, click the Add button.
The table in Figure 32 is displayed.
Figure 32 Add BootP IP
The fields in the table are defined below.
IP Address: Specifies the IP address to be used by the BootP
protocol. This IP address must be within the address pool of the
DHCP server.
MAC Address: Specifies the MAC address of the client device for the
IP address.
Remark: Contains a description of the IP address or client device.
