manualshive.com logo in svg

Allied Telesis AT-8000S Series, Справочное руководство CLI, Страница: 99 / 304

Поделиться
Скачать
Allied Telesis AT-8000S Series Скачать руководство пользователя страница 99

IGMP Snooping Commands

Page 97

ip igmp snooping leave-time-out

The 

ip igmp snooping leave-time-out 

Interface Configuration (VLAN) mode command configures the leave-

time-out. If an IGMP report for a multicast group was not received for a leave-time-out period after an IGMP Leave 
was received from a specific port, this port is deleted from the member list of that multicast group.To return to the 
default configuration, use the 

no 

form of this command.

Syntax

ip igmp snooping leave-time-out 

{

time-out 

| 

immediate-leave

}

no ip igmp snooping leave-time-out

Parameters
•

time-out

 — Specifies the leave-time-out in seconds for IGMP queries. (Range: 0-2147483647)

•

immediate-leave

 — Indicates that the port should be immediately removed from the members list after 

receiving IGMP Leave.

Default Configuration

The default leave-time-out configuration is 10 seconds.

Command Mode

Interface Configuration (VLAN) mode

User Guidelines

The leave timeout should be set greater than the maximum time that a host is allowed to respond to an IGMP 
query.

Use 

immediate leave

 only where there is just one host connected to a port. 

Example

The following example configures the host leave-time-out to 60 seconds.

show ip igmp snooping mrouter

The 

show ip igmp snooping mrouter 

User EXEC mode command displays information on dynamically learned 

multicast device interfaces.

Syntax

show ip igmp snooping mrouter 

[

interface vlan-id

]

Parameters
•

vlan-id — 

VLAN number.

Default Configuration

This command has no default configuration.

Console(config)# 

interface vlan 

2

Console(config-if)# 

ip igmp snooping leave-time-out

 60

Содержание AT-8000S Series

















































































































































































































































































































Отзывы:

Нет отзывов