manualshive.com logo in svg

Allied Telesis AT-8000S Series, Справочное руководство CLI, Страница: 171 / 304

Поделиться
Скачать
Allied Telesis AT-8000S Series Скачать руководство пользователя страница 171

SNMP Commands

Page 169

Syntax

snmp-server user username

 

groupname [remote engineid-string] [ auth-md5 password | auth-sha password |  

auth-md5-key md5-des-keys | auth-sha-key sha-des-keys ]

no snmp-server user

 

username [remote

 

engineid-string]

Parameters
•

username

—Specifies the name of the user on the host that connects to the agent. (Range: 1-30 characters)

•

groupname

—Specifies the name of the group to which the user belongs. (Range: 1-30 characters)

•

engineid-string

—Specifies the engine ID of the remote SNMP entity to which the user belongs. The engine ID 

is a concatenated hexadecimal string. Each byte in the hexadecimal character string is two hexadecimal 
digits. Each byte can be separated by a period or colon. (Range: 5-32 characters)

•

auth-md5

 

password

—Indicates the HMAC-MD5-96 authentication level. The user should enter a password 

for authentication and generation of a DES key for privacy. (Range: 1-32 characters)

•

auth-sha

 

password

—Indicates the HMAC-SHA-96 authentication level. The user should enter a password 

for authentication and generation of a DES key for privacy. (Range: 1-32 characters)

•

auth-md5-key

 

md5-des-keys

—Indicates the HMAC-MD5-96 authentication level. The user should enter a 

concatenated hexadecimal string of the MD5 key (MSB) and the privacy key (LSB). If authentication is only 
required, 16 bytes should be entered; if authentication and privacy are required, 32 bytes should be entered. 
Each byte in the hexadecimal character string is two hexadecimal digits. Each byte can be separated by a 
period or colon. (16 or 32 bytes)

•

auth-sha-key

 

sha-des-keys

—Indicates the HMAC-SHA-96 authentication level. The user should enter a 

concatenated hexadecimal string of the SHA key (MSB) and the privacy key (LSB). If authentication is only 
required, 20 bytes should be entered; if authentication and privacy are required, 36 bytes should be entered. 
Each byte in the hexadecimal character string is two hexadecimal digits. Each byte can be separated by a 
period or colon. (20 or 36 bytes)

Default Configuration

No group entry exists.

Command Mode

Global Configuration mode

User Guidelines

If auth-md5 or auth-sha is specified, both authentication and privacy are enabled for the user.

When a 

show running-config

 Privileged EXEC mode command is entered, a line for this user will not be 

displayed. To see if this user has been added to the configuration, type the 

show snmp users

 Privileged EXEC 

mode command.

An SNMP EngineID has to be defined to add SNMP users to the device. Changing or removing the SNMP 
EngineID value deletes SNMPv3 users from the device’s database.

The remote engineid designates the remote management station and should be defined to enable the device to 
receive informs.

Examples

The following example configures an SNMPv3 user 

John 

in group 

user-group

.

Console(config)# 

snmp-server user

 John user-group

Содержание AT-8000S Series

















































































































































































































































































































Отзывы:

Нет отзывов