Allied Telesis AT-8000S Series Скачать руководство пользователя страница 76

Страница: 76 / 304

Page 74

Allied Telesyn AT-8000S Switch

CLI Reference Guide

back-pressure

The

back-pressure

Interface Configuration (Ethernet, port-channel) mode command enables back pressure on a

given interface. To disable back pressure, use the

form of this command.

Syntax

back-pressure

no back-pressure

Default Configuration

Back pressure is enabled.

Command Mode

Interface Configuration (Ethernet, port-channel) mode

User Guidelines

There are no user guidelines for this command.

Example

In the following example back pressure is enabled on port 1/e5.

clear counters

The

clear counters

User

EXEC mode command clears statistics on an interface.

Syntax

clear counters

[

ethernet

interface

port-channel port-channel-number

]

Parameters
•

interface —

Valid Ethernet port.

(Full syntax:

unit/port

)

•

port-channel-number —

Valid port-channel number.

Default Configuration

This command has no default configuration.

Command Mode

User

EXEC mode

User Guidelines

There are no user guidelines for this command.

Console(config)#

interface ethernet

1/e5

Console(config-if)#

back-pressure

Содержание AT-8000S Series

















































































































































































































































































































Результаты поиска

Содержание AT-8000S Series

Отзывы:

Allied Telesis AT-8000S Series, Справочное руководство CLI, Страница: 76 / 304

Результаты поиска

Содержание AT-8000S Series

Отзывы: