manualshive.com logo in svg

Allied Telesis AT-8000S Series, Справочное руководство CLI, Страница: 261 / 304

Поделиться
Скачать
Allied Telesis AT-8000S Series Скачать руководство пользователя страница 261

VLAN Commands

Page 259

switchport protected

The 

switchport protected 

Interface Configuration mode command enables Private VLAN Edge, by overriding the 

FDB decision, and sends all Unicast, Multicast and Broadcast traffic to an uplink port. To disable overriding the 
FDB decision, use the no form of this command.

Syntax

switchport protected

 {

ethernet port

 | 

port-channel

 

port-channel-number

 }

no switchport protected

Parameters
•

port

— Specifies the uplink Ethernet port.

•

port-channel-number 

— Specifies the uplink port-channel.

Default Configuration

Switchport protected is disabled.

Command Mode

Interface Configuration (Ethernet, port-channel) mode

User Guidelines

Private VLAN Edge (PVE) supports private communication by isolating PVE-defined ports and ensuring that all 
Unicast, Broadcast and Multicast traffic from these ports is only forwarded to uplink port(s).

PVE requires only one VLAN on each device, but not on every port; this reduces the number of VLANs required 
by the device. Private VLANs and the default VLAN function simultaneously in the same device.

The uplink must be a GE port.

Example

This example configures ethernet port 1/e8 as a protected port, so that all traffic is sent to its uplink (ethernet port 
1/e9).

switchport mode

The 

switchport mode 

Interface Configuration mode command configures the VLAN membership mode of a port. 

To return to the default configuration, use the 

no 

form of this command.

Syntax

switchport mode 

{

access

 | 

trunk | general

}

no switchport mode

Console(config)# 

interface ethernet 

1/e8

Console(config-if)# 

switchport forbidden vlan add 

234-256

Console(config-if)# 

exit

Console(config)# 

interface ethernet 

1/e9

Console(config-if)# 

switchport protected ethernet 

1/e8

Содержание AT-8000S Series

















































































































































































































































































































Отзывы:

Нет отзывов