Allied Telesis AT-8000S Series, Справочное руководство CLI, Страница: 276 / 304

Page 274
Allied Telesyn AT-8000S Switch
CLI Reference Guide
Default Configuration
The default port number is 443.
Command Mode
Global Configuration mode
User Guidelines
Specifying 0 as the port number effectively disables HTTP access to the device.
Example
The following example configures the https port number to 100.
crypto certificate generate
The crypto certificate generate Global Configuration mode command generates a self-signed HTTPS
certificate.
Syntax
crypto certificate [number] generate [key-generate length][cn common- name][ou organization-unit][or
organization] [loc location] [st state] [cu country] [duration days]
Parameters
•
number — Specifies the certificate number. (Range: 1 - 2)
•
key-generate — Regenerate the SSL RSA key.
•
length — Specifies the SSL RSA key length. (Range: 512 - 2048)
•
common- name — Specifies the fully qualified URL or IP address of the device.
(Range: 1 - 64)
•
organization — Specifies the organization name. (Range: 1 - 64)
•
organization-unit — Specifies the organization-unit or department name.(Range: 1 - 64)
•
location — Specifies the location or city name. (Range: 1 - 64)
•
state — Specifies the state or province name. (Range: 1 - 64)
•
country — Specifies the country name. (Range: 2 - 2)
•
days — Specifies number of days certification is valid. (Range: 30 - 3650)
Default Configuration
The Certificate and SSL’s RSA key pairs do not exist.
If no certificate number is specified, the default certificate number is 1.
If no RSA key length is specified, the default length is 1024.
If no URL or IP address is specified, the default common name is the lowest IP address of the device at the time
that the certificate is generated.
If the number of days is not specified, the default period of time that the certification is valid is 365 days.
Console(config)# ip https port 100