Allied Telesis AT-8000S Series Скачать руководство пользователя страница 237

Страница: 237 / 304

System Management Commands

Page 235

Example

The following example specifies the device host name.

stack master

Note

This command is operational in the AT-8000S/24, AT-8000S/24POE, AT-8000S/48 and AT-8000S/
48POE devices.

The

stack master

Global Configuration mode command enables forcing the selection of a stack master. To return

to the default configuration, use the

form of this command.

Syntax

stack master unit unit

no stack master

Parameters
•

unit—

Unit number of the new master (Range: 1-2)

Default Configuration

Disables forcing the selection of a stack master.

Command Mode

Global Configuration mode

User Guidelines

This command is not relevant to standalone devices.

The following algorithm is used to select a unit as the master:

•

If only one master-enabled unit is in the stack (1 or 2), it becomes the master.

•

If a unit configured as a forced master, it becomes the master.

If a forced master unit is removed from a stack and placed in a different stack with another forced master unit, both
are considered to be forced, and the election criteria continue as follows:

•

The unit with the longer up-time is elected master. Units are considered to have the same up-time if they were

powered up within ten minutes of each other.

•

If both forced master units have the same up-time, Unit 1 is elected.

Example

The following example selects Unit 2 as the stack master.

Console(config)#

hostname

Marvell

Marvell(config)#

Console(config)#

stack master unit

Содержание AT-8000S Series

















































































































































































































































































































Результаты поиска

Содержание AT-8000S Series

Отзывы:

Allied Telesis AT-8000S Series, Справочное руководство CLI, Страница: 237 / 304

Результаты поиска

Содержание AT-8000S Series

Отзывы: