Allied Telesis AT-8000S Series, Справочное руководство CLI

Страница: 49 / 304

Clock Commands
Page 47
Default Configuration
No external clock source
Command Mode
Global Configuration mode
User Guidelines
There are no user guidelines for this command.
Examples
The following example configures an external time source for the system clock.
clock timezone
The clock timezone Global Configuration mode command sets the time zone for display purposes. To set the
time to the Coordinated Universal Time (UTC), use the no form of this command.
Syntax
clock timezone hours-offset [ minutes minutes-offset ] [ zone acronym ]
no clock timezone
Parameters
•
hours-offset — Hours difference from UTC. (Range: -12
– +
13)
•
minutes-offset — Minutes difference from UTC. (Range: 0
–
59)
•
acronym — The acronym of the time zone. (Range: Up to 4 characters)
Default Configuration
Clock set to UTC.
Command Mode
Global Configuration mode
User Guidelines
The system internally keeps time in UTC, so this command is used only for display purposes and when the time is
manually set.
Examples
The following example sets the timezone to 6 hours difference from UTC.
Console(config)# clock source sntp
Console(config)
#
clock timezone -6 zone CST