Allied Telesis AT-8000S Series, Справочное руководство CLI

Страница: 222 / 304

Page 220
Allied Telesyn AT-8000S Switch
CLI Reference Guide
Chapter 22.Syslog Commands
logging on
The logging on Global Configuration mode command controls error message logging. This command sends
debug or error messages to a logging process, which logs messages to designated locations asynchronously to
the process that generated the messages. To disable the logging process, use the
no form of this command.
Syntax
logging on
no logging on
Default Configuration
Logging is enabled.
Command Mode
Global Configuration mode
User Guidelines
The logging process controls the distribution of logging messages at various destinations, such as the logging
buffer, logging file or syslog server. Logging on and off at these destinations can be individually configured using
the
logging buffered , logging file , and logging Global Configuration mode commands. However, if the logging
on command is disabled, no messages are sent to these destinations. Only the console receives messages.
Example
The following example enables logging error messages.
logging
The logging Global Configuration mode command logs messages to a syslog server. To delete the syslog server
with the specified address from the list of syslogs, use the no form of this command.
Syntax
logging { ip-address | hostname } [ port port ] [ severity level ] [ facility facility ] [ description text ]
no logging { ip-address | hostname }
Console(config)# logging on