Allied Telesis AT-8000S Series, Справочное руководство CLI

Страница: 196 / 304

Page 194
Allied Telesyn AT-8000S Switch
CLI Reference Guide
Default Configuration
VLANs are mapped to the common and internal spanning tree (CIST) instance (instance 0).
Command Modes
MST Configuration mode
User Guidelines
All VLANs that are not explicitly mapped to an MST instance are mapped to the common and internal spanning
tree (CIST) instance (instance 0) and cannot be unmapped from the CIST.
For two or more devices to be in the same MST region, they must have the same VLAN mapping, the same
configuration revision number, and the same name.
Example
The following example maps VLANs 10-20 to MST instance 1.
name (mst)
The name MST Configuration mode command defines the configuration name. To return to the default setting,
use the no form of this command.
Syntax
name string
Parameters
•
string— MST configuration name. Case-sensitive (Range: 1-32 characters).
Default Configuration
The default name is a bridge ID.
Command Mode
MST Configuration mode
User Guidelines
There are no user guidelines for this command.
Example
The following example defines the configuration name as region1.
Console(config)# spanning-tree mst configuration
Console(config-mst)# instance 1 add vlan 10-20
Console(config) # spanning-tree mst configuration
Console(config-mst) # name region 1