Allied Telesis AT-8000S Series Скачать руководство пользователя страница 33

Страница: 33 / 304

Address Table Commands

Page 31

Syntax

bridge multicast filtering

no bridge multicast filtering

Default Configuration

Filtering multicast addresses is disabled. All multicast addresses are flooded to all ports.

Command Mode

Global Configuration mode

User Guidelines

If multicast devices exist on the VLAN, do not change the unregistered multicast addresses state to drop on the
switch ports.

If multicast devices exist on the VLAN and IGMP-snooping is not enabled, the

bridge multicast forward-all

command should be used to enable forwarding all multicast packets to the multicast switches.

Example

In this example, bridge multicast filtering is enabled.

bridge multicast address

The

bridge multicast address

Interface Configuration (VLAN) mode command registers a MAC-layer multicast

address in the bridge table and statically adds ports to the group. To unregister the MAC address, use the

form

of this command.

Syntax

bridge multicast address

{

mac-multicast-address

ip-multicast-address

}

bridge multicast address

{

mac-multicast-address

ip-multicast-address

}

[

add

remove

]

{

ethernet

interface-list

port-channel port-channel-number-list

}

no bridge multicast address

{

mac-multicast-address

ip-multicast-address

}

Parameters
•

add

— Adds ports to the group. If no option is specified, this is the default option.

•

remove

— Removes ports from the group.

•

mac-multicast-address

— A valid MAC multicast address.

•

ip- multicast-address

— A valid IP multicast address.

•

interface-list

— Separate nonconsecutive Ethernet ports with a comma and no spaces; a hyphen is used to

designate a range of ports.

•

port-channel-number-list

— Separate nonconsecutive port-channels with a comma and no spaces; a hyphen

is used to designate a range of ports.

Default Configuration

No multicast addresses are defined.

Console(config)#

bridge multicast filtering

Содержание AT-8000S Series

















































































































































































































































































































Результаты поиска

Содержание AT-8000S Series

Отзывы:

Allied Telesis AT-8000S Series, Справочное руководство CLI, Страница: 33 / 304

Результаты поиска

Содержание AT-8000S Series

Отзывы: