© Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT
11
202065R6
Special Features
Programming Control
The control allows the washer owner to program the
control with the use of the keypad. Audit, diagnostic,
cycle and vend information may be programmed and
retrieved by pressing combinations of the Select Cycle
and Select Wash Temp pads.
For details on programming cycle and vend information,
refer to
Programming Control
.
Collecting Audit Information
The control will store audit information in its memory
that can be retrieved by pressing various combinations
of Select Cycle and Select Wash Temp pads. The
control will record coins entered, total machine cycles,
and total start pulses.
For more information on the audit features, refer to
Collecting Audit Information
.
NOTE: Additional audit information is retrievable
with an external device, a card reader or a
network. Refer to the appropriate instruction
manual.
Testing Machine and Control
Functions
Special programmable diagnostic features built into
the control allow the owner to run specific diagnostic
tests. By opening and closing the service door and then
pressing various sequences of Select Cycle and Select
Wash Temp pads, the owner may perform the
following tests:
•
Control Software Version Number
•
Service Door Opening Test
•
Coin Vault Opening Test
•
Coin Drop #1 Input Test
•
Coin Drop #2 Input Test
•
Lid Switch Input Test
•
Pressure Switch Tests
•
Show Fill Time Test
•
Show Drain Time Test
•
Start Pulse Test
•
Configuration Display Tests
•
Coin Drop Header Present Test
For detailed information on running diagnostic tests,
refer to
Testing Machine and Electronic Control
Functions
.
Rapid Advance Feature
This feature allows the user to quickly advance
through active cycles or advance into a cycle from the
Ready Mode. This feature is useful when tests must be
performed immediately on a washer currently in an
active cycle. In this case, the user can quickly advance
through the cycles to the Ready Mode. At this point,
the user can perform the required tests and then return
the washer to the point it was interrupted.
For detailed information on using the Rapid Advance
feature, refer to
Rapid Advance Feature
.
Clearing the Vend Feature
This feature allows the user to return the control back
to the Ready Mode if coins have been entered but the
full vend price has not yet been satisfied.
For more information on using the Clear Vend feature,
refer to
Clear Vend Feature
.
Communications Mode
This feature allows the washer control to communicate
with an external device, a card reader or a network.
This allows the washer control to be programmed and
have its data read without using the keypad.
For more detailed information on using the
Communications Mode feature, refer to
Communications Mode
.
Coin Drop
The control will accept pulses from a single or dual
coin drop to satisfy vend price. Each coin drop will
have the ability to start or run a cycle.
