© Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT
Programming Control
29
202065R6
5. Start Pulse Mode “PLSn”
This option allows the owner to program the Start
Pulse Input. The Start Pulse Mode can be used for
after-market central pay or card systems. The central
system sends the start pulse to the Start Pulse Input of
the control to start the cycle. If set for single pulse, one
start pulse from the central system will start the cycle.
If set for multiple pulses, each pulse will deduct from
the vend price the value set up in
option 4
(Start Pulse
Value)
until the vend is satisfied.
How to Program Start Pulse Mode
1. Control must be in Manual Mode. Refer to
Entering the Manual Mode
.
2. Press the DELICATES ( ) or the COLD ( )
keypad until “
Prog
” appears in the display. Press
the START (enter) keypad and “
AtS1
” will
appear in the display.
3. Press the DELICATES ( ) or the COLD ( )
keypad to scroll through the programmable
options until “
PLSn
” appears in the display.
4. When “
PLSn
” appears in the display, press the
START (enter) keypad. A number, or “
oFF
”, will
appear in the display. The number corresponds to
the current Start Pulse Mode Programming
Value.
5. Locate the desired number in the first column of
Table 1
below.
6. Press the DELICATES ( ) or the COLD ( )
keypad to increase or decrease the current
number until correct.
NOTE: To go back to the current programmable
option without changing the value, press the
WARM (<) keypad.
7. Press the START (enter) keypad when the correct
number appears in the display. The next option,
“
AtyP
”
, will appear in the display.
NOTE: To program “
AtyP
” (Available Type), refer
to
option 6
. To program other options, refer to the
appropriate section.
How to Exit Programming Feature
Press the WARM (<) keypad until the control returns
to Ready Mode.
“PLSn”
Start Pulse
Mode Value
Start Pulse
ON/OFF
Single Pulse/
Multiple Pulses
oFF
OFF
Single Pulse
128*
ON
Single Pulse
192
ON
Multiple Pulses
* Factory default setting.
Table 1
>
<
>
<
>
<
