© Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT
Testing Machine and Electronic Control Functions
202065R6
92
Production Test Cycle
To Enter Production Test Cycle
1. Be certain control is in Ready Mode, washer lid
is closed, and access panel or coin vault is open.
2. While pressing and holding the HOT keypad
with one hand, press the DELICATES keypad
with the other hand.
3. When the control enters the Production Test
Cycle, it will first display “
S XX
” with the “
XX
”
showing the software version of the control.
4. The control will advance through the sequence of
test steps whenever START (enter) is pressed,
with the exception of the Keypad Test and Step
#4 Test. Refer to
Table 13
for all tests in the
Production Test Cycle.
To Exit Production Test Cycle
The test will be exited when the START (enter)
keypad is pressed in Step #10. The control will return
to Ready Mode. Otherwise, the control must be
powered down to end the test.
