© Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT
202065R6
6
Control Identification
Select Cycle Pads
(Refer to
Figure 1
or
Figure 2
)
SELECT CYCLE pads are used to select the specific
washer cycle. These pads include NORMAL, PERM
PRESS, and DELICATES. These pads allow the user
to select a cycle other than the default cycle (PERM
PRESS). The SELECT CYCLE keypads are not active
after the first fill has been completed. The selected
cycle is indicated by the light (LED) on the pad.
Pressing the flashing START pad will confirm the
selection and the cycle will begin.
The CYCLE SELECT/SOIL LEVEL pad is used to
select a cycle modifier including SMALL LOAD,
MEDIUM or LIGHT/MEDIUM and HEAVY. The
selected option is indicated by the light (LED) next to
the selection.
Select Wash Temp Pads
(Refer to
Figure 1
or
Figure 2
)
SELECT WASH TEMP pads are used to select the
temperature of the water used for the wash fill. These
pads include HOT, WARM, and COLD. These pads
allow the user to select a water temperature other than
the default setting (WARM). The SELECT WASH
TEMP pads are active only during the first fill of the
cycle. The selected temperature is indicated by the
light (LED) on the pad.
The SELECT WASH TEMP pads also affect the rinse
fill temperature if HOT or WARM is selected and
either the Warm Rinse option is enabled, or the
HEAVY cycle modifier Warm Rinse option is enabled.
Both the SELECT WASH TEMP pads and the SELECT
CYCLE pads are used in various combinations for
programming cycles, retrieving audit information,
running diagnostic tests, and other operations. These
operations are covered throughout this manual and
cover the manual programming and data retrieval
options.
Figure 1
TLW5R
1
LED Light
5
LED Status Lights
2
SELECT CYCLE pads (top row)
6
CYCLE SELECT pad
3
Four 7-Segment Digits
7
START pad
4
Display
8
SELECT WASH TEMP pads (bottom row)
TLW5R
1
2
4
5
7
Electronic Control
3
8
6
