Washer Overheats, Cycles On Motor Thermal Protector, Switch Actuator Kicks In
And Out
E tp
on digital display
Is belt tacky, not
allowing proper slip?
Is belt tension too
great, not allowing
proper slip?
No
Check belt and
replace if defective.
Yes
Is control
inoperative?
No
Make sure idler
spring is properly
connected.
Yes
Are motor switch
functions inoperative?
No
Test control and
replace if
inoperative.
Yes
Is there a bind in
pump?
No
Refer to Motor Test
Procedure section to
check switch
functions.
Yes
Are brake pads or
brake assembly
binding?
No
Replace pump.
Yes
Have bearings,
transmission or motor
locked up and will
not turn?
No
Free binding pads, or
replace pads and
brake assembly.
Yes
Is voltage incorrect?
No
Check that all these
components are able
to move freely.
Correct binding
component.
Yes
Contact local utility
company, or have a
qualified electrician
check power supply.
Yes
Troubleshooting Flowcharts
©
Copyright, Alliance Laundry Systems LLC -
DO NOT COPY or TRANSMIT
28
Part No. 204591EN