Alliance Laundry Systems BWNBX2PP303AW01, Руководство по устранению неисправностей

Страница: 15 / 64

DRY2088N_SVG
2
1
1. Tension Spring
2. Cover Catch
Figure 6
2. Open cover for coin drop.
3. Place a small flathead screwdriver under right side of tension
spring and lift up. Refer to Figure 7 .
MIX2B_SVG
3
2
1
1. Left Tab
2. Small Flathead Screwdriver
3. Right Side of Tension Spring
Figure 7
4. Use screwdriver to move spring approximately 3 mm to left.
5. Lift spring over left tab. Refer to
Figure 7 .
6. Rotate spring clockwise, 40 to 60 degrees, until it is free from
right tabs. Refer to Figure 8 .
MIX3B_SVG
2
1
1. Center Tab
2. Tabs
Figure 8
7. Use screwdriver to remove spring from center tab. Refer to
Figure 8 .
8. Lift spring, with attached clip, off drop.
9. Remove clip from spring. Refer to
Figure 9 .
MIX4B_SVG
1
1. Clip
Figure 9
10. Attach clip to new tension spring, Part No. 209/00598/02.
11. Place clip, installed on spring, in slot on coin drop. Refer to
Figure 10 .
MIX8B_SVG
1
1. Slot
Figure 10
12. Use a small flathead screwdriver to push spring under center
tab. Refer to Figure 11 .
General Troubleshooting
©
Copyright, Alliance Laundry Systems LLC -
DO NOT COPY or TRANSMIT
15 Part No. 204591EN