Allen-Bradley 1783-WAPAK9, Руководство пользователя

Страница: 264 / 612

264 Rockwell Automation Publication 1783-UM006A-EN-P - May 2014
Chapter 7 Configuring Radio Settings
Configuring LBS on Access Points
Use CLI to configure LBS on your access point. Beginning in privileged EXEC
mode, follow these steps to configure LBS:
1.
Enter global configuration mode.
configure terminal
2.
Create an LBS profile for the access point and enter LBS configuration
mode.
dot11 lbs profile-name
3.
Enter the IP address of the location server and the port on the server where
the access point sends UDP packets that contain location information.
server-address ip-address port port
4.
(Optional) Select the location method that the access point uses when
reporting location information to the location server.
In this release,
rssi
(where the access point measures the location packet
RSSI) is the only option and is also the default.
method {rssi}
5.
(Optional) Select the packet type that the access point accepts from the
LBS tag.
•
short - The access point accepts short location packets from the tag. In
short packets, the LBS information is missing from the tag packet frame
body and the packet indicates the tag transmit channel.
•
extended - This is the default setting. The access point accepts extended
packets from the tag. An extended packet contains two bytes of LBS
information in the frame body. If the packet does not contain those two
bytes in the frame body, the access point drops the packet.
packet-type {short | extended}
6.
(Optional) Specifies that the LBS packet sent by the tag must match the
radio channel on the access point that receives the packet.
If the channel used by the tag and the channel used by the access point
don’t match, the access point drops the packet. Channel match is enabled
by default.
channel-match
7.
(Optional) Specifies the multicast address that the tag uses when it sends
LBS packets. The default multicast address is 01:40:96:00:00:10.
multicast-address mac-address
8.
Specify the radio interface on the LBS profile that is enabled.
The 2.4 GHz radio is radio 0, and the 5 GHz radio is radio 1. The profile
remains inactive until you enter this command.
interface dot11 { 0 | 1 }