Allen-Bradley 1783-WAPAK9, Руководство пользователя

Страница: 233 / 612

Rockwell Automation Publication 1783-UM006A-EN-P - May 2014 233
Administering the WAP Access Chapter 6
3.
Return to privileged EXEC mode.
end
4.
Verify your entries.
show running-config
5.
(Optional) Save your entries in the configuration file.
copy running-config startup-config
The
minutes-offset
variable in the
clock timezone
global
configuration command is available for those cases where a local time zone is a
percentage of an hour different from UTC. For example, the time zone for some
sections of Atlantic Canada (AST) is UTC-3.5, where the 3 means 3 hours .5
means 50 percent. In this case, the necessary command is:
clock timezone AST -3 30.
To set the time to UTC, use the
no clock timezone
global configuration
command.
Configuring Summer Time (Daylight Saving Time)
Beginning in privileged EXEC mode, follow these steps to configure summer
time (daylight saving time) in areas where it starts and ends on a particular day of
the week each year:
1.
Enter global configuration mode.
configure terminal
2.
Configure summer time to start and end on the specified days every year.
Summer time is disabled by default. If you specify
clock summer-time
zone recurring
without parameters, the summer time rules default to
the United States rules.
•
For
zone
, specify the name of the time zone (for example, PDT) to be
displayed when summer time is in effect.
•
(Optional) For
week
, specify the week of the month (1…5 or last).
•
(Optional) For
day
, specify the day of the week (Sunday, Monday...).
•
(Optional) For
month
, specify the month ( January, February...).
•
(Optional) For
hh:mm
, specify the time (24-hour format) in hours and
minutes.
•
(Optional) For
offset
, specify the number of minutes to add during
summer time. The default is 60.
clock summer-time zone recurring [week day month
hh:mm week day month hh:mm [offset]]
3.
Return to privileged EXEC mode.
end