Allen-Bradley 1783-WAPAK9, Руководство пользователя

Страница: 195 / 612

Rockwell Automation Publication 1783-UM006A-EN-P - May 2014 195
Configure the Stratix 5100 WAP Using the Command-Line Interface Chapter 5
Creating a Credentials Profile Beginning in privileged EXEC mode, follow these steps to create an 802.1X
credentials profile.
For information in Device Manager, see AP Authentication on page 124 .
1.
Enter the global configuration mode to configure the terminal.
configure terminal
2.
Creates a
dot1x
credentials profile and enters the
dot1x
credentials
configuration submode.
dot1x credentials profile
3.
Enter the anonymous identity to be used. This is optional.
anonymous-id description
4.
(Optional) Enter a description for the credentials profile.
description description
5.
Enter the authentication user id.
username username
6.
Enter an unencrypted password for the credentials.
•
0, an unencrypted password follows.
•
7, a hidden password follows. Hidden passwords are used when
applying a previously saved configuration.
•
LINE, an unencrypted (clear text) password. Unencrypted and clear
text are the same. You can enter a 0 followed by the clear text password,
or omit the 0 and enter the clear text password.
password {0 | 7 | LINE}
7.
(Optional and used only for EAP-TLS)—Enter the default pki-trustpoint.
pki-trustpoint pki-trustpoint
8.
Return to the privileged EXEC mode.
end
9.
(Optional) Save your entries in the configuration file.
copy running config startup-config
Use the
no
form of the
dot1x creden
command to negate a parameter.
The following example creates a credentials profile named test with the username
Rockwell and a the unencrypted password wirelessap :
ap1240AG>enable
Password:xxxxxxx
ap1240AG#config terminal
Enter configuration commands, one per line. End
with CTRL-Z.
ap1240AG(config)# dot1x credentials test