ALIBI ALI-PTZ30XR, Руководство пользователя

Страница: 24 / 90

16
SECTION 3: GETTING STARTED
SECTION 3
Getting Started
3.1 Power-up initial display
After the power is applied, the camera will perform a series of self-tests including lens functions, the panning movement and tilting
movement. After the power-up self-tests complete, the system information screen is displayed for 2 minutes on top of the live view
screen. An example is shown below.
System information
Important information about the camera settings is shown in the system information display. See below.
System Information Description
SN The serial number of the camera.
ADDRESS The default communication address of the camera.
COM FORMAT The communication settings of the RS-485 interface: baud rate (4 digits), data bit (1 digit) and stop bit (1 digit).
PROTOCOL Protocol configuration for communicating with other devices.
FIRMWARE The version of the firmware.
HARDWARE The version of the hardware
BUILD DATE The date when the software was compiled.
TILT SUCCESS The initial Tilt functional diagnostic executed successfully.
PAN SUCCESS The initial Pan functional diagnostic executed successfully.
If the address of your camera is the same as another camera on the RS-485 network, one of them has to change. Also, if the
communication parameters (COM FORMAT) are not the same as the settings on RS-485 network, they must be configured to
match. Use the features with your control keyboard, DVR, or DVS to configure these parameters.