ALIBI ALI-PTZ30XR, Руководство пользователя

Страница: 42 / 90

34
SECTION 4: CONFIGURING THE PTZ CAMERA
1. Use the p and q buttons to move the position icon to the parameter you want to change, and then click Iris+ . The
position icon will change to a .
2. Use the p and q buttons to show the parameter to what you prefer.
3. Click Iris+ again to change the parameter. The position icon will change to either a , or .
4. Repeat steps
1
through
3
above to change other parameters, as needed.
5. Move to the DISPLAY SETTINGS page 2, and the repeat steps
1
through
3
above to change other parameters, as needed.
4.7 Step 4: Configuring PTZ control parameters
Most PTZ control parameters are configured in the MOTION PARAMETER submenu. These parameters affect how the camera will
move from one surveillance target to another. Some features include:
•
AUTO FLIP : In manual tracking mode, when a target object moves directly beneath the camera, the camera automatically
rotates 90 degrees horizontally (flips) for tracking. The default setting of AUTO-FLIP is ON for this camera model.
•
DOME SPEED : Dome speed sets the manual movement speed of the camera. Dome speed is adjustable from 1 .. 10.
•
IMAGE FREEZE : This feature enables the live view to switch directly from one scene defined by a preset to another, without
showing the middle areas between these two to improve the surveillance efficiency.
•
LIMIT STOP
s: The camera can be programmed to move within the configurable limit stops (left/right, up/down).
•
PARK ACT
ion: The action the camera will automatically perform after a pre-defined period (PARK TIME) of inactivity.
•
PRESET SPEED
: the speed of calling a preset can be set from level 1 to 8. The higher levels will call a preset faster.
•
PROPORTIONAL PAN
ning: When this function is enabled, the pan/tilt speed changes according to the amount of zoom. If
using high zoom, the pan/tilt speed is slowed to keep the image from moving too fast on the live view display. You can set
PROPORTIONAL PAN to ON or OFF to enable/disable the function. This function is enabled automatically while setting patterns.
•
SCAN SPEED
: Scan speed defines the scan degree per second of a panning scan, tilting scan, frame scan, random scan and
panoramic scan. Scan speed is adjustable from 1 to 40 degrees per second.