ALIBI ALI-PTZ30XR, Руководство пользователя

Страница: 4 / 90

iv
SAFETY WARNINGS AND CAUTIONS
Warnings
•
Use of the product only when in compliance with local electrical safety regulations.
•
Use only the required power adapter. The standard power adapter is 24 Vac / 2 A.
•
Do not connect additional devices to the power adapter. Doing so may over-heat the device and cause a fire hazard.
•
Always make sure that the power adapter plug is fully inserted into the power socket.
•
When the product is installed on a wall or ceiling, it must be securely attached.
•
If the camera emits smoke, odors or noise power it off immediately and unplug the power cable. Contact the service center.
•
If the camera does not work properly, please contact your dealer or the nearest service center. Never attempt to disassemble
the camera yourself. (Your provider is not responsibility for problems caused by unauthorized repair or maintenance.)
Cautions
•
Do not drop the dome or subject it to physical shock. Do not expose it to high levels of electromagnetic radiation.
•
Do not install the camera on surfaces that are subject to vibrations or shock.
•
Do not place the camera in extremely hot, cold (operating temperature range: -22 °F ~ 149 °F (-30 °C ~ +65°C),
dusty or damp locations. Fire or electrical shock can occur.
•
Exposing the equipment to direct sunlight, low ventilation or heat sources such as heater or radiator should be avoided.
•
Do not aim the camera at the sun or extra bright places. A blooming or smear may occur (which is not a malfunction however),
and affect the longevity of CCD.
•
Use the glove provided when opening the dome cover. Do not touch the dome cover; the acidic moisture on skin can erode the
surface coating.
•
Please use a soft and dry cloth when cleaning the inside and outside surfaces of the dome cover. Do not use alkaline
detergents.
Preparation for Installation
•
Basic requirements:
—
All the electronic operations must be compliant with local electrical safety regulations, fire prevention regulations and
other related regulations.
—
Verify that all accessories are included with your shipment.
—
Make sure that the camera is suitable for the location and security requirements where it will be installed. If not, please
contact the supplier.
—
Always use this product in accordance with the manufactures specifications and recommendations.
•
Check installation space. Make sure the place have enough space to install the camera and its accessories.
•
Check the intensity of conformation at the installation location. Please make sure that the ceilings or walls are strong enough to
withstand four times the weight of camera and its accessories.
•
Preparation of cables:
—
Choose video cable in accordance with the transmission distance. The video should meet the least demands as: 75 Ω
resistance; 100% copper core conducting wire; 95% weaving copper shield.
—
For RS-485 communication cable, please refer to Appendix B.
—
For 24 Vac power cabling, please refer to Appendix C.
•
Keep packaging for possible future use. If a failure occurs, return the product to the factory with the original packaging.
Shipment without the original packaging may damage the product and incur additional costs.