35
HD-TVI 30x Zoom PTZ IR Outdoor Camera User Manual
SECTION 4: CONFIGURING THE PTZ CAMERA
To configure
MOTION
settings:
1.
Open the
MOTION PARAMETER
submenu from the
OSD | DOME SETTINGS
menu.
MOTION menu page 1
MOTION menu page 2
2.
Use the
u
and the
t
buttons to move between MOTION page 1 and page 2, as needed.
3.
When the position icon is either a , or
, use the
p
and
q
buttons to position the icon at the parameter you
want to change.
4.
Click
Iris+
. The position icon will change to a .
NOTE
: When the position icon is in front of SETTING STOPS and CLEAR
STOPS, clicking
Iris+
will open a different screen.
5.
Use the
p
and
q
buttons to show the parameter to what you prefer.
6.
Click
Iris+
again to change the parameter. The position icon will change to a .
7.
Repeat steps
2
through
6
above to change the settings of other parameters.
If you opened
SETTING STOPS
, you can configure the scan range limits left, up, right and down. To set stops:
1.
Use the
p
and
q
buttons to move the position icon to the SETTING STOPS option, and then click
Iris+
.
2.
Use the
u
and the
t
buttons to move point the camera at the LEFT limit, and then click
Iris+
to continue.
3.
Use the
u
and the
t
buttons to move point the camera at the RIGHT limit, and then click
Iris+
to continue.
4.
Use the
p
and the
q
buttons to move point the camera at the UP limit, and then click
Iris+
to continue.
5.
Use the
p
and the
q
buttons to move point the camera at the DOWN limit, and then click
Iris+
to continue.
6.
Use the
p
and the
q
buttons to move position icon to LIMIT STOP, and then click
Iris+
to change the setting.
7.
Use the
p
or
q
buttons switch the LIMIT STOP option to ON, and then click
Iris+
to change the setting.
Содержание ALI-PTZ30XR
Страница 8: ...viii NOTES...
Страница 82: ...74 SECTION 5 OSD MENU REFERENCE...
