ALIBI ALI-PTZ30XR, Руководство пользователя

Страница: 18 / 90

10
SECTION 2: INSTALLATION
Comm. mode SW2 switch 7
Simplex OFF
Half-duplex ON
6. The RS-485 termination resistor is controlled using SW2 switch 8.
Termination
Resistor mode
SW2 switch 8
Use resistor OFF
Block resistor ON
7. Reinstall the SWITCH cover plate.
2.2 Camera installation
The camera can be mounted to a wall, post, on a corner, or to a ceiling using one of the brackets available for this camera. See “1.2
Accessories” on page 4 for bracket types and models. The example shown in this section illustrates camera installation with the
ALI-PTZWB Wall Mount Bracket. Since camera installation with other bracket types is similar, use this procedure as a general guide
for installing the camera with those brackets.
NOTE
•
The wall must be thick enough to mount the expansion screws.
•
The wall must be strong enough to withstand more than 4 times the weight of the dome and its accessories.
1. Prepare the mounting surface for the camera.
a. Obtain the best fasteners for attaching the camera mount bracket to the mounting surface. The fasteners must fit the
wall mount bracket.
b. Position the wall mount bracket in the location where you want to install it, then use it as a guide to mark the location
of the screw holes.