ALIBI ALI-PTZ30XR, Руководство пользователя

Страница: 17 / 90

9 HD-TVI 30x Zoom PTZ IR Outdoor Camera User Manual
2. Locate DIP switch packages SW1 (switches 1 .. 8) and SW2 (switches 1 .. 8).
3. Set the device address DIP switches 1 through 8 using the following table. Each device on the RS-485 network must have
a different address. You can configure up to 256 devices (address 0 .. 255) on the RS-485 network. The switch package
indicates which position is ON and which is OFF.
Table 1. DIP address switch settings
Dome Address
SW1 (address) switch number
1 2 3 4 5 6 7 8
0 OFF OFF OFF OFF OFF OFF OFF OFF
1 ON OFF OFF OFF OFF OFF OFF OFF
2 OFF ON OFF OFF OFF OFF OFF OFF
3 ON ON OFF OFF OFF OFF OFF OFF
4 OFF OFF ON OFF OFF OFF OFF OFF
5 ON OFF ON OFF OFF OFF OFF OFF
6 OFF ON ON OFF OFF OFF OFF OFF
7 ON ON ON OFF OFF OFF OFF OFF
8 OFF OFF OFF ON OFF OFF OFF OFF
9 ON OFF OFF ON OFF OFF OFF OFF
… … … … … … … … …
255 ON ON ON ON ON ON ON ON
4. Set the network baud rate DIP switches 1 and 2 using the following table. Each device on the RS-485 network must use the
same baud rate. By default, the baud rate is set to 2400 baud (1
g ON, 2 g OFF, 3 g OFF).
Baud rate
SW2 switches
1 2
3
2400 ON OFF OFF
4800 OFF ON OFF
9600 ON ON OFF
19200 OFF OFF ON
NOTE
The speed dome is self-adaptive to PELCO-D, PELCO-P and private protocols. These protocols cannot set using DIP switches.
5. The Communications mode is set using SW2 switch 7.
SECTION 2: INSTALLATION